부분해석법을 이용한 냉장고 가스켓 삽입부 형상설계
Effective Design on the Inserting Part of Refrigerator Door Gasket Using Partial Analysis Method
김판근(부산대학교); 하만영(부산대학교); 손창민(부산대학교); 박상후(부산대학교)
26권 3호, 137~143쪽
초록
A gasket is known as an important component for mechanical sealing between mating surfaces. In case of the refrigerator, a gasket is generally installed into the edge line of a door to prevent cold air leaking out from the inside of a cabinet. The gasket shape used in a refrigerator is very complicated; it has a few deformable small rooms and wings (upper part) and inserting part (lower part) into the door. By the intricate shape, it takes much time and trouble on analysis by using a full-shape model. To settle down this problem, an effective design way of a gasket is proposed in this work. The inserting part is parametrically designed using FEM without considering the complicate upper part, Through this work, computational time and efforts are much reduced comparing to the full-shape analysis method. And the performance of a newly designed gasket was evaluated qualitatively.
Abstract
A gasket is known as an important component for mechanical sealing between mating surfaces. In case of the refrigerator, a gasket is generally installed into the edge line of a door to prevent cold air leaking out from the inside of a cabinet. The gasket shape used in a refrigerator is very complicated; it has a few deformable small rooms and wings (upper part) and inserting part (lower part) into the door. By the intricate shape, it takes much time and trouble on analysis by using a full-shape model. To settle down this problem, an effective design way of a gasket is proposed in this work. The inserting part is parametrically designed using FEM without considering the complicate upper part, Through this work, computational time and efforts are much reduced comparing to the full-shape analysis method. And the performance of a newly designed gasket was evaluated qualitatively.
- 발행기관:
- 대한설비공학회
- 분류:
- 기타기계공학