큐펠법과 적정법을 통한 은합금의 함량 분석 비교
Study on Cupellation and Titration Composition Analysis for Silver Alloys
송정호(서울시립대학교); 송오성(서울시립대학교); 이영주(코리아주얼리감정원); 이성훈(코리아진주감정원); 강미영(코리아진주감정원); 장성락(캐리티)
8권 1호, 9~14쪽
초록
스털링실버(Ag-92.5%+Cu-7.5%), Ag-96%+Cu-4%+백금도금, Ag-90%+10%Al, Ag-92.5%+Cu-4.5%+Al-1%+Ge-1%+Cr-1%, 99.99% 순은(pure silver)의 다섯 가지 은합금에 대해서 직접 제작하고 실제 이들의 함량을 적정법과 큐펠법으로 함량을 확인하였다. KSD0405가 규정한 적정법에 비해서 큐펠법은 (-)오차로 측정되었고 이는 회취과정에서 Ag의 일부가 산화됨으로 인해 PbO에 고용되어 손실되기 때문이었다. 한편 Al이 합금된 은합금은 한 번의 회취로 Al이 제거되지 않는 문제가 있었다. 특히 Pt도금된 시편은 용융된 은 비드 표면부에 Pt가 잔류하여 회취되지 않는 특성이 있었다. 또한 구리 외에 내식성이 우수한 합금원소 양이 증가할수록 회취과정에서 전체 비드와 분리되어 다른 비드를 형성하여 측정오차를 크게 하는 문제가 있었다. 한편 은합금 비드는 큐펠과의 젖음성이 우수하여 56°~60°의 젖음성을 가지는 특징은 있으나 큐펠과의 계면부에 묻는 회취부산물이 측정오차를 크게 하는 문제가 있었다. 기존의 금합금의 경우에 신뢰도가 높았던 큐펠분석은, 은합금의 경우에는 적정법과 비교하여 1.28∼7.26% 이상의 분석 오차를 보였다.
Abstract
In this research, we prepared five types of silver alloys (#1.Ag-92.5%+Cu-7.5% sterling silver, #2.Ag-96%+Cu-4% with Pt electroplating, #3.Ag-90%+10%Al, #4.Ag-92.5%+Cu-4.5%+Al-1%+Ge-1%+Cr-1%, and #5. 99.99%Ag), and analyzed the silver content of the alloys by the cupellation. The result of the cupellation compared to the titration method of KSD0405, showed (-) errors because about 10% of silver was oxidized and dissolved into PbO matte. Especially, in the Ag-Al alloy, the Al element could not be removed by single cupellation method. Moreover, for the Ag/ 4%-Cu with Pt electroplating sample, Pt layer remained on the surface of the silver bead after the cupellation. In addition, corrosion resistive alloys led to form satellite beads from a main silver bead, which occurred the errors in weight measurement. Silver beads showed the wettability of 56°-60° with a cupel, which formed the byproduct of the cupel at the bottom of the bead. This caused an error in measuring the bead weight. Although the cupellation was suitable for the gold alloy evaluation, it showed the serious error of 2.0-7.3% for silver alloys.
- 발행기관:
- 한국귀금속보석학회
- 분류:
- 기타디자인