산업재의 품질 검사용 UV LED 조사기의 특성
The Characteristics of UV LED Illuminator used for Quality Investigation of Industrial Product
류장렬(공주대학교); 박종현(순천향대학교); 양진규(공주대학교)
14권 7호, 1~7쪽
초록
LED는 저 전력, 긴 수명, 고 휘도, 빠른 응답, 친환경적인 특성의 장점을 갖고 있는데, LED가 여러 분야에 사용되기 위하여 LED 칩(chip)의 고효율화와 더불어 복사 조도와 배광분포가 우수해야 한다. 본 연구에서는 산업재의 제조공정에서 도포공정을 할 때, 접착제 내의 형광 물질을 통하여 접착재의 평탄성, 균일성 등을 검사하는 UV LED 검사기기를 제작하였다. 산업재의 접착공정에서 자동으로 도포된 접착제의 도포상태를 확인하기 위해서 접착제에 함유되어 있는 형광물질에 반응하는 자외선은 UV-A영역, 즉 315~400nm인데, 이중 미량의 형광물질에 확실히 반응할 수 있는 최적의 UV파장을 결정하고, UV광선이 인체에 도달하지 않도록 렌즈를 장착하여 지향각을 30°이하로 좁게 제작하는 것을 목표로 하였다. 입력전압 220V에서 소비전력 20.4W, 광속 11.9lm, 지향각 27˚, UV 광 출력 3.2W를 얻어 신발 등의 제조공정에서의 결함 검출을 위한 검사기기에 적합한 것으로 평가되었다.
Abstract
LEDs have several merits such as low power consumption, long lifespan, high brightness, fast response, and eco-friendliness. In order for LEDs to be used in many fields, they need to have high integration of LED chips, good radiance, and good photometric distribution. In this research, we have produced UV LED illuminator that inspects the flatness and uniformity of the bond through a fluorescent material within the adhesive in the coating process of the industrial products. Since UV rays with the wavelength of 315~400 nm react to fluorescent materials in the adhesive, they are used to examine the coating condition of the adhesive. We decided an optimal wavelength of the UV rays which definitely react to even a small amount of the fluorescent material, and aimed to make the direction angle of the illuminator to be less than 30° in order for the UV rays not to reach the body of the worker. Since the proposed UV LED illuminator showed the power consumption of 20.4W, luminous flux 11.9lm, direction angle of 27° and UV output power of 3.2W for the input voltage of 220V, we are sure that it is suitable for the flaw detection in the manufacturing process of shoes and so on.
- 발행기관:
- 한국정보기술학회
- 분류:
- 기타공학일반