개별요소법과 유한차분법 연계 해석을 이용한 EPB TBM 굴진해석 Part Ⅰ: 모델링
Numerical Analysis of EPB TBM Driving using Coupled DEM-FDM Part Ⅰ: Modeling
최순욱(한국건설기술연구원); 이효범(고려대학교); 최항석(고려대학교); 장수호(한국건설기술연구원); 강태호(한국건설기술연구원); 이철호(한국건설기술연구원)
30권 5호, 484~495쪽
초록
EPB TBM의 굴진을 수치적으로 해석하기 위해 개별요소법(DEM, discrete element method), 유한요소법(FEM, finite element method), 유한차분법(FDM, finite difference method) 등과 같은 다양한수치해석 기법이 적용되어 왔다. 본 논문에서는 이중 개별요소법과 유한차분법을 연계하는 방식을 채택하여 EPB TBM 굴진해석 모델링 방법을 제시하였다. 제시한 개별요소법-유한차분법 연계 TBM 굴진해석 모델에서 TBM이 굴착하는 굴착부는 개별요소법을 적용하였으며, 입자 접촉 물성치의 경우 일련의삼축압축시험을 통해 교정하였다. 굴착부 주변지반은 유한차분법을 연계시켜 정지토압계수를 고려하여굴착부에 수평지중응력을 구현할 수 있도록 하였다. 또한, 이를 통해 소요 입자 개수를 감소시켜 모델의해석효율을 증대시켰다. 본 논문에서 제시한 수치해석 모델은 TBM의 굴진율, 커터헤드 및 스크류 컨베이어 회전속도 등을 조절할 수 있으며 TBM 굴진 중 토크, 추력, 챔버압, 배토량을 도출해 낼 수 있다.
Abstract
To numerically simulate the advance of EPB TBM, various type of numerical analysis methods have been adopted including discrete element method (DEM), finite element method (FEM), and finite difference method (FDM). In this paper, an EPB TBM driving model was proposed by using coupled DEM-FDM. In the numerical model, DEM was applied in the TBM excavation area, and contact properties of particles were calibrated by a series of triaxial tests. Since the ground around the excavation area was coupled with FDM, the horizontal stress considering the coefficient of earth pressure at rest could be applied. Also, the number of required particles was reduced and the efficiency of the analysis was increased. The proposed model can control the advance rate and rotational speed of the cutter head and screw conveyor, and derive the torque, thrust force, chamber pressure, and discharging during TBM tunnelling.
- 발행기관:
- 한국암반공학회
- 분류:
- 자원공학