모델차수축소법 기반 주파수응답해석 및 딥러닝을 이용한 블레이드 모서리의 균열 예측
Blade Edge Crack Prediction Using Model Order Reduction-based Frequency Response Analysis and Deep Learning
우찬영(안동대학교); 서희원(안동대학교); 한정삼(안동대학교)
46권 11호, 1003~1013쪽
초록
본 논문에서는 컴프레서 블레이드의 주파수응답을 이용한 딥러닝 모델을 통하여 결함이 쉽게 발생하는 블레이드 모서리 균열의 위치 및 크기를 예측 방법을 제시하였다. 블레이드의 여러 위치에서 정의된 출력점에서 구한 주파수응답으로부터 다양한 형태의 주파수응답 지도를 생성하여 입력 데이터로 이용하였다. 크리로프 부공간 모델차수축소법으로 생성된 정확한 축소 모델로 주파수응답해석을 수행함으로써 매우 효율적으로 방대한 주파수응답 빅데이터를 구축할 수 있었다. 주파수응답 지도를 입력 데이터로 사용하여 블레이드 모서리 균열을 예측하는 합성곱 신경망 모델은 9개의 합성곱 계층으로 구성되었으며 출력 계층으로는 회귀 계층을 통해 균열의 높이와 크기를, 분류 계층을 통해 균열이 발생한 모서리를 예측하였다. 주파수응답으로 계산되는 입력 데이터의 형태 및 출력점의 위치에 따른 모델의 정확도 및 성능을 비교함으로써 주파수응답 지도를 활용한 블레이드 모서리 균열의 위치 및 크기 예측 방법의 활용 가능성과 유효성을 구체적으로 제시하였다.
Abstract
In this paper, we propose a method for predicting the location and size of cracks at the blade edge, which are prone to defects, through a deep learning model using the frequency response of the compressor blade. Various types of frequency response maps were generated from the frequency responses obtained from the output points defined at several positions of the blade and used as input data for training a convolutional neutral network (CNN). A frequency response analysis with the accurate order-reduced model generated by a Krylov subspace model order reduction method enabled to efficiently construct vast frequency response big data. The CNN model that predicts blade edge cracks using the frequency response map consists of nine convolutional layers. As the output layer, the height and size of cracks were predicted through a regression layer, and the edge where the crack occurred was predicted through a classification layer. By comparing the accuracy and performance of the CNN model according to the type of the input data calculated from the frequency response and location of the output point, the applicability and effectiveness of the method for predicting the location and size of blade edge cracks using the frequency response map were presented in detail.
- 발행기관:
- 대한기계학회
- 분류:
- 기계공학