오토 트래킹 토탈스테이션을 이용한 지적측량의 정확도 분석 연구
A Study on the Accuracy Analysis of Cadastral Surveying Using Auto-Tracking Total Station
주한돈(청주대학교); 홍성언(청주대학교)
8권 5호, 13~18쪽
초록
본 연구에서는 오토 트래킹 토탈스테이션을 이용해 토지 현황경계점의 위치정보를 취득해보고, 이 성과를 기존 지적측량 방식인 전자평판, RTK-GNSS으로 수행한 성과와 비교‧분석해 보고자 하였다. 그리고 이를 기초로 지적측량에 적용 가능성을 제시해 보고자 하였다. 실험지역을 선정하고 관측 및 전자평판 측량성과와 비교‧분석 결과, 측정 현황경계점 프리즘의 인식 오류로 위치정보를 취득하지 못한 점을 제외한다면 X좌표의 RMSE는 .034m, Y좌표의 RMSE는 .034m, 연결오차의 RMSE는 .048m인 것으로 나타났다. 이러한 분석결과는 현행 법령에서 규정하고 있는 오차의 허용범위를 충분히 만족시키는 것으로 나타났다. RTK-GNSS와 비교할 경우 인식률에서 우수성을 보이는 것으로 나타났다. 따라서 오토 트래킹 토탈스테이션 측량 방식의 지적측량에 충분한 적용 가능성이 있는 것으로 나타났다. 다만, 지역적으로 임야지역은 농경지 및 건물지역에 비해 상대적으로 수목의 영향으로 인한 인식 장애가 많아 현재로서는 모든 지역의 활용에 한계가 있고, 지형적 여건을 고려해 선택적인 적용이 이루어져야 할 것으로 판단된다. 오토 트래킹 토탈스테이션 측량 방식은 측량작업 환경이 양호한 지역에서는 2인으로 충분히 현장 업무 처리가 가능하다. 그렇기 때문에 현재의 지적측량 3인 기준의 팀체제를 탄력적으로 운영 한다면 작업 효율성과 경제성 면에서 단계적 도입에 따른 많은 효과가 있을 것으로 기대된다.
Abstract
In this study, the position information of the land status boundary point was acquired using the auto-tracking total station, and this result was compared with the performance performed by the existing cadastral surveying method, electronic plane table, RTK-GNSS. And based on this, I tried to suggest the possibility of application to cadastral surveying. The RMSE of the X coordinate is .034m, the RMSE of the Y coordinate is .034m, the RMSE of the connection error is .048m, except for the fact that the position information was not acquired due to the recognition error of the boundary point prism, the result of comparison and analysis with the results of observation and electronic plane table survey after selecting the experimental area, and the measurement land status point. The results of this analysis were found to sufficiently satisfy the tolerance of error stipulated in the current laws and regulations. Compared to RTK-GNSS, it showed superiority in recognition rate. Therefore, it was found that there is sufficient applicability to the cadastral surveying of the Auto-Tracking Total Station survey method. However, compared to farmland and building areas, there are relatively many cognitive impairments due to the influence of trees in forest areas, so currently there are limits to the use of all areas, and it is judged that selective application should be made in consideration of topographical conditions. The auto-tracking total station surveying method is sufficient for field work with two people in areas with a good survey environment. Therefore, if the current cadastral survey team system of three people is operated flexibly, it is expected that there will be many benefits in terms of work efficiency and economic feasibility through phased introduction.
- 발행기관:
- 한국비즈니스학회
- 분류:
- 과학기술학