Toluene, m-Xylene 그리고 n-Decane 이성분 혼합계에 대한 101.3 kPa 하의 인화점 측정
Measurement of Flash Point for Binary Mixtures of Toluene, m-Xylene and n-Decane at 101.3 kPa
표호성(우송대학교); 황인찬(우송대학교 소방방재학과)
31권 3호, 224~229쪽
초록
현재 화학 산업 현장, 분리 정제공정 위험물 제조공정 및 저장소에서 휘발성 용매의 화재 및 폭발 위험성을 판단하는데 , 중요한 변수 중 하나인 인화점은 가연성 물질에 대한 위험성 판단을 나타내는 지표이며 위험물의 안정성 평가를 위한 아주 중요한 정보로 활용된다. 본 연구는 산업현장에서 용매로 사용되는 이성분 혼합물인 {toluene + m-xylene}, {toluene + n-decane} 그리고 {m-xylene + n-decane} 계에 대한 101.3 kPa 하의 인화점을 Stanhope-Seta 밀폐식 인화점 측정기를 이용하여 측정하였다. 각 이성분계 혼합물에 대한 인화점을 예측하기 위해 Raoult의 법칙, Wilson 그리고 UNIQUAC 파 라미터를 이용하였고 실험 결과와 비교해 보았다. 비교 결과 측정된 모든 계에서 최소인화점은 발견되지 않았고, Raoult 의 법칙을 제외하고 모든 실험값과 예측값과 실험값은 최대 편차가 1.39 K 이내의 결과로 유사함을 보였다.
Abstract
Flammable substances are used in laboratories and industrial process. The flash point (FP) is one of the most important physical properties for determining the potential of a liquid of being a fire or explosive hazard. The FP data at 101.3 kPa were measured for the binary systems {toluene + m-xylene}, {toluene + n-decane} and {m-xylene + n-decane}. The FP measurements were obtained according to the standard test method (ASTM D3278) using a Stanhope-Seta closed cup flash point tester. The measured flash points were compared with the predicted values calculated using Raoult’s Law and also following two GE models, Wilson and UNIversal QUAsiChemical (UNIQUAC). The average absolute deviation between the predicted and measured FP was less than 1.39 K.
- 발행기관:
- 한국청정기술학회
- 분류:
- 화학공학